(03) 9764 8194
Trig Point Trig Point Trig Point
Trig Point
Trig Point
Chassis mount canopies

BT50 2011-2019

DUAL CAB & EXTRA CAB

From $18,940.00 (inc GST)

Contact Us

The Trig Point Chassis Mount Canopy for the 2011–2019 Mazda BT-50 mounts directly to the chassis, keeping weight down and the floor lower than a tray-mounted setup. Monocoque construction opens up internal storage, while integrated 300kg-rated roof racks, dual gull-wing doors, and tapered underbody boxes make it equally at home on site or on tour. The canopy and toolbox doors are fully sealed against water and dust, and the main doors integrate with the vehicle’s central locking for peace of mind. Available for dual cab (1700mm) and extra cab (1990mm, with front undertray toolboxes included). Manufactured in Melbourne and fully ADR compliant.

In stock – availability varies by model. Contact us for more info.

Made Tough

  • Direct chassis mounting, no tray required, reducing weight and canopy floor height
  • Monocoque construction removes the need for an internal frame and increases storage areas whilst giving the perfect balance between light weight and durability
  • Water and dustproof fully sealed canopy and toolbox doors
  • Integrated roof racks with 300kg load rating reducing overall vehicle height and improving fuel efficiency
  • Trimmed carpet flooring
  • Recessed rear LED lights to reduce risk of damage
  • Standard finish is a durable black powder coat with optional colour coded paint
  • Rear bar designed to protect canopy and underbody boxes

Made Smart

  • Completely flush canopy floor with no lips to make loading and unloading a breeze
  • Single handed opening with slam shut locks designed to function the same way as modern car doors
  • Fully lockable with main canopy doors integrated with vehicle central locking
  • Two large gull wing doors to give you easy access to the large internal space, fully recessed to give a smooth exterior finish
  • Two under body boxes, tapered to improve departure angle
  • Door ajar buzzer to reduce risk of accidental damage
  • Recessed air vents to cool and circulate air through the canopy
  • 12V power outlet, fuse box and rear power distribution for additional accessories
  • Two interior dual colour LED door switched lights

Made in Australia

Trig Point products are proudly manufactured at our purpose-built facility in Melbourne, Australia and are fully ADR compliant.


Available Models
Weight
Length
WIDTH
Vehicle sPECIFIC

STANDARD INCLUSIONS
Vehicle sPECIFIC

OPTIONAL EXTRAS
PRICE INC GST

BT50 dual cab 2011-2019

Available ModelsBT50 dual cab 2011-2019
Weight285kg
Length1700mm
WIDTH1865mm
Vehicle sPECIFIC

STANDARD INCLUSIONSRear sensor relocation (if fitted)
Side infill panels to visually assist the gap between the cab and canopy
Vehicle sPECIFIC

OPTIONAL EXTRASRear camera relocation (if fitted)
PRICE INC GST $18,940

BT50 extra cab 2011-2019

Available ModelsBT50 extra cab 2011-2019
Weight315kg
Length1990mm
WIDTH1865mm
Vehicle sPECIFIC

STANDARD INCLUSIONSFront undertray toolboxes
Rear sensor relocation (if fitted)
Vehicle sPECIFIC

OPTIONAL EXTRASRear camera relocation (if fitted)
PRICE INC GST $21,990
What's the difference between a chassis mount and a tray mount canopy? +

A chassis mount canopy attaches directly to the vehicle’s chassis rails, so no separate tray is needed. This reduces overall weight and lowers the canopy floor height compared to a tray-mounted setup.

How much weight can the roof racks carry? +

The integrated roof racks are rated to 300kg, giving you a solid platform for rooftop tents, boats, awnings, or additional storage.

Is the canopy weatherproof? +

Yes. Both the canopy and toolbox doors are fully sealed against water and dust, keeping your gear protected in all conditions.

Does the canopy integrate with the vehicle's central locking? +

Yes. The main canopy doors integrate with the vehicle’s central locking system, and a door-ajar buzzer helps prevent accidental damage from doors left open.

What's the difference between the dual cab and extra cab versions? +

The extra cab version is longer (1990mm vs 1700mm) and includes front undertray toolboxes as standard, giving you more storage up front.

Will I be able to refuel using a high-flow pump? +

In most cases, you will not be able to refuel using a high-flow pump. High-flow diesel pumps generally exceed the flow rate of the tank breather and filler neck. While some original tub mounted fuel filler arrangements may have tolerated high-flow pumps, relocating the fuel filler lower to create space for the tray will generally stop this. Our fuel filler systems are engineered for use with standard-flow service station pumps. If you must refuel with a high-flow diesel pump, it may be possible by using it at part trigger and by slightly tilting the nozzle to reduce the sensitivity of the shut-off valve.

Please contact us if you are interested in this product. The pricing above is based on the base canopy or tray only and DOES NOT include any options, shipping or fitting.

FINANCE OPTIONS AVAILABLE

Contact us for more information

START THE CONVERSATION

Give us a call or complete the form and we’ll be in touch to discuss your project in more detail.
[email protected] (03) 9764 8194
Trig Point
Head Office
30 Laser Drive
Rowville
Victoria 3178
(03) 9764 8194 [email protected]

Sign up for updates

Trig Point Trig Point Trig Point
Trig Point