As a result of Trig Point’s commitment to research and development our canopy has the best combination of low weight and high strength on the market.
Trig Point achieves this through our unique aluminum and steel monocoque construction which reduces the need for an interior frame improving storage space.
Trig Point’s innovative ‘Track side’ mounting provides superior strength and optimises function with a flush floor in all our Horizon tray mounted canopies.
‘Track side’ mounting differs from other canopies on the market with the canopy overlapping the tray to ensure alignment and stability.
Trig Point do not use old-fashioned
T-handles on our products, we use efficient single-handed opening, and slam shut locks which function the same way as modern car doors.
The main canopy doors and trundle drawer come standard with integrated central locking and our toolboxes are fully lockable.
Trig Point canopies standard integrated roof rack reduces the overall vehicle height and improves fuel efficiency whilst still maintaining a dynamic roof load rating of 200kg.
The perimeter roof rack rail doubles as the mounting track for numerous roof mounted accessories including awnings, solar panels and rooftop tents.
Our canopy doors, toolboxes and trundle drawer are one of the best sealed products against dust and water on the market.
All our canopies have filtered air vents to cool and circulate air through the canopy.
Trig Point canopies have a 12 volt power outlet, internal dual coloured LED door mounted lights and a 6 outlet fuse box included as standard.
We understand how easy it can be to leave your canopy door open, especially when you’re in a hurry, so our canopies are fitted with a ’door open’ buzzer as standard.
We have the expertise to relocate original parking sensors, camera and radar (where fitted) when fitting your canopy.
The interior of our canopies can be fitted out in thousands of unique combinations to meet your needs.
From our popular Trig Point Kitchens and drawer systems to upright and drop slide fridges and shelving units, whether it’s for work or play, we have a layout for you.
Our canopies are fully powder coated inside and out with Mannex Black powdercoat as standard. Painting of your canopy with 2 pack colour coded paint can be added as an option either as a two tone or full paint finish.
Paint is a great way to further complement Trig Point’s styling to make your canopy look and feel even more a part of the original vehicle.
Trig Point’s unique styling is second to none with our canopies looking at home in the city on worksites or camping in Australia’s most remote locations.
Our premium fit and finish matches seamlessly with modern car aesthetics, making a Trig Point canopy the best accessory for your vehicle.
Pricing is for the canopy only, please see the Horizon Tray page or give us a call for further information including pricing and trays to suit your builds needs.
All Trig Point Canopies come standard with an integrated roof rack, allowing you to store items directly on the canopy. The structure is built into the canopy frame and is covered by a checker plate walk on roof. The perimeter tie down rail doubles as the mounting point for all our rooftop accessories.
Available accessories include rooftop tent mounts, awning mounts, solar panels, cross bars, full length platforms or tradie racks.
Trig Points front toolboxes are a great option to increase your storage capacity. Whilst standard on many of our longer canopy models where there is sufficient space in front of the wheel arches, they can also be optioned on the Landcruiser 70 dual cab canopy to suit +300mm chassis extensions.
A Trig Point canopy door hatch enables additional ventilation in the canopy when the water and dust proof outer cover is removed revealing a laser cut mesh grill. Single or multiple door hatches can be fitted to any of our canopy doors.
We also recommend fitting a roof vent if carrying animals in the canopy.
Trig Point Rear Winch Cradles are available for customers who need a rear winch for work or play. Trig Point’s Rear Winch Cradles will fit most low mount winches up to 12,000lb depending on the vehicle and fit neatly above your factory tow bar mounting directly to your chassis.
Suits:
Trig Points External Bolt on Tyre Carrier is a popular option and is available for all models, moving your spare tyre to a more accessible location or allowing you to carry an extra spare.
Trig Points ladder provides easy access to the roof and is constructed from 4mm aluminum for the perfect balance between weight and strength. The ladder is tapered towards the vehicle for ease of use and has a single easy to use rubber tension latch designed to function even when covered in mud and dust.
You can option up your ladder with courtesy lights which are activated when the ladder is folded down and firewood locking arms to enable wood to be carried short distances into campsites.
Trig Points external rear wall Jerry Can/ Gas Bottle holders are available in either a single or a double configuration. Enabling you to safely carry Jerry Cans or Gas bottles on the outside of the canopy. These are fully lockable, vented and constructed of 3mm aluminum with a steel reinforced base to reduce weight and optimize strength.
Our trundle drawers are fully dust and waterproof, including the roller bearing mechanisms, to ensure smooth operation for years to come.
Single-handed slam shut locks, central locking, door ajar buzzers and catches to keep it in position for use on sloping ground maximise functionality and convenience.
The drawer is available in two lengths (1540mm and 910mm internal) which can be optioned with an integrated table and numerous divider configurations.
Trig Points water tanks are constructed from food grade plastics and are securely mounted under the canopies to keep weight low and forward, perfect for drinking water. These are available in three sizes (50L, 70L and 125L) and can be mixed and matched depending on the size of your canopy and trundle drawer length.
Water tanks are installed with a gravity drain tap as standard.
Trig Points unique Water Pump and Creek Draw kit is available as an optional extra. Providing flexibility to either use external sources of water for washing up and showering whilst preserving your drinking water or alternatively filling your tank on the go if required.
Trig Point canopies can accommodate almost any fridge on the market. Whether upright, drawer or chest, either fixed or on drop slides, we can configure the canopy layout to meet your needs.
If you are looking for recommendations, please chat to our friendly team.
Trig Point kitchens are a pioneering lightweight design for 4WD tourers.
Functionality is the focus with single-handed opening, adjustable shelves and options for 12V and 240V power. It is housed in a fully enclosed box with multiple elastic retainers to ensure items remain secure on uneven terrain. Our innovative double-fold table opens to kitchen bench height, great for taller vehicles, and includes an integrated sink.
Available in grey or black finishes.
Trig Point offers internal storage drawers with an extruded aluminum runner construction with a carpeted top and exterior which can be configured in any length and width to suit your vehicle’s needs. Drawers can include an integrated slide out table.
Trig Point offers modular panels with numerous divider and shelving options that can be bolted into your canopy in thousands of combinations to enable maximum functionality and personalisation.
Trig Point canopies come standard with LED taillights, if desired you can choose our black chrome taillight option to further enhance the looks of your canopy.
Trig Point has numerous battery and power options available for installation in our canopies. Our most popular setup is either 100 or 200 ah Invicta lithium batteries with 50 amp Redarc chargers and an integrated battery monitor screen packaged neatly in Trig Points battery boxes and electrical panels.
Trig Point can work with you to ensure you have the right set up for your needs.
Trig Point canopies come standard with interior door lights activated by door switches and have both an orange and white light mode.
If you require additional interior or exterior lighting, we can add these to your build to ensure you have adequate lighting under shelves or the perimeter of the vehicle.
Trig Point use Redarc inverters in our products which range from 350 to 3000 watts to service your 240 volt needs ranging from phone chargers, coffee machines, induction cooktops or other small kitchen appliances.
Trig Point can work with you to ensure you have the right set up for your needs.
Trig Point has our own solar panels designed to fit perfectly between our canopies roof rails. These are 120 watt solar panels and can be configured around cross bars or other roof mounted accessories.
Trig Point mounts ARB compressors in either the driver or passenger toolbox of our canopies. The compressors provide a convenient way to inflate tyres, blow out air filters or even run small air tools.
Trig Point offers a comprehensive range of fleet solutions designed to meet the demanding needs of the mining, trade, and commercial sectors. Built with durability and strength in mind, our products are engineered to withstand the toughest environments, ensuring enhanced productivity and long-lasting performance.
In addition to superior construction, our canopies and trays are designed to secure tools and equipment from water, dust, and theft, providing peace of mind on every job. Utilizing advanced manufacturing techniques, each product meets the highest industry standards and is backed by a comprehensive warranty on craftsmanship.
With Trig Point canopies and trays, fleet operators can rely on robust, secure, and efficient solutions to handle any challenge.
Need more information? Check out our resources page.
Chassis mount canopies offer a lighter overall weight and are stronger in comparison to tray mounted canopies. The floor height is lower and flush with no lips for things to catch on when loading and unloading the canopy. Chassis mount canopies also provide a cost saving to customers as you are not purchasing both a tray and canopy.
Tray mounted canopies offer the flexibility of having a canopy shorter than the tray, this enables a small tray or ledge at the rear for external storage. Users can also remove the canopy completely and convert back to a tray.
Normally Tray mounted canopies have the reputation of being heavier and having a higher floor than a chassis mount canopy. Trig points unique design minimises these issues.
Trig Point Tray mounted canopies lap down both sides of the tray and bolt to the sides of the tray. This enables a flush floor which is only 35mm higher than the chassis mount floor and allows us to use a large cross section where the door frame joins the floor.
The large cross section significantly adds to the strength of this join and supports the canopy wall. Removing what is normally a weak point which can be prone to failure on other brands of canopies.
At Trig Point we have undertaken significant R&D to ensure the appropriate material is used for each location in the canopy to ensure optimal strength and a lighter weight finish.
Areas under high fatigue loads such as mounts and the chassis are steel to ensure strength. Whereas big bulky panels that are not under high loads can use alloy to save on weight. This results in our products offering the best combination of weight and strength on the market.
Trig Point invests significant time in testing and refining all products and parts prior to being released to the market. Custom products are essentially an unproven prototype and not in alignment with our business model to provide high quality reliable products that can endure Australia’s harshest offroad conditions.
Yes, Trig Point canopies are the most dust proof canopies on the market.
Trig Point achieve this by placing automotive seals on the canopy body (rather than the doors) resulting in a flat sealing surface and protects the seals from air and water pressure acting directly on them leading to the best sealed canopy on the market.
Trig Point Canopies contain air vents on the front wall to allow the doors to shut and prevent condensation within the canopy. We fit all our air vents with dust filters.
Trig Point manufacture all products at our own facilities in Rowville in Melbourne’s South East. We are proudly Australian Made Certified.
Trig Point canopies and trays can be purchased through new car dealerships, fitted before you pick up your new vehicle and packaged with your finance (if applicable).
Contact us directly to discuss your build and options. Once finalised take your quote to your dealer and they can arrange finance, fitment and payment.
Unfortunately, the design of our tray mounted canopies makes them incompatible with other brands’ trays. Our tray mounted canopies are unique in that they overlap down the sides of the tray. This design feature gives us a significant increase in the strength of the floor and walls of the canopies whilst keeping the floor low and flush with the door opening for easy loading.
If you have a Trig Point tray we can add the canopy retrospectively. Give us a call to discuss your needs for a tray mounted canopy.
Yes, you can add all or some of your interior fit our or accessories either at the time of your canopy or tray installation or anytime in the future. Give us or your local distributor a call to discuss options and arrange installation.
1/9 Inventory Ct
Arundel QLD 4214
(0439) 799 578
Unit 5, 16 Aspiration Circuit
Bibra Lake WA 6163
(08) 9434 1111
Trig Point canopies and trays can be purchased through new car dealerships, fitted before you pick up your new vehicle and packaged with your finance.
Contact us directly to discuss your build and options. Once finalised take your quote to your dealer and they can arrange finance, fitment and payment.
